NOTICE: In order to properly utilize ADP with TripLog. It is important to know that ADP connectors are used for individuals who are not previous ADP customers. Whereas, the ADP full integration is for customers who are already previously integrated with ADP. To differentiate between the two connections, the term "connector" will be listed in the ADP Marketplace for those who require an ADP connector for their account. This applies to all connections.
IMPORTANT NOTE: The TripLog Integration with RUN Powered by ADP is not compatible with the Time and Attendance product in RUN. You will be able to connect your account but when uploading to the ADP side, there will be an unrecoverable error. This is escalated to ADP development, but currently there is no solution or workaround if you have RUN and the Time and Attendance product.
Sign Up on ADP Marketplace
If you currently do not have a TripLog account and are enrolled in RUN Powered by ADP® use the link above to choose the Full Integration, select the Editions and Pricing when logged into your ADP Marketplace. Choose a Monthly or Annual subscription, and confirm the order. You will be invoiced by ADP, and you can change the subscription type and the number of users later.
Log in to TripLog Web Dashboard
TripLog is fully integrated with ADP through Single Sign-On (SSO). On your ADP Marketplace account, you can find all the apps you’ve subscribed to. Go to “My Apps” page, click on the TripLog logo, and you will be logged in to your TripLog account.
If this is the first time, you will be presented a Consent screen. Please click “ALLOW” access.
You will land on the TripLog one-time setup screen. Please go through the setup process.
If you already have a TripLog account and want to integrate with RUN Powered by ADP® you will want to use the Connector link above. Enter your current admin account in TripLog to find and link the correct account. Follow the prompts through the ADP purchase process.
Note:
The number of seats that you purchase WILL limit the number of available seats in TripLog. Be sure to select the amount that matches the current number of active users in your account. If you change your billing, always choose the amount of seats you intend to have in total not "new adds".
The connector will be billed through ADP, but your TripLog invoice will still be processed by TripLog
Initiate the Consent screen.
During the setup process, you will need to accept the connection consent. This should prompt during setup and once in the application. If you have not seen the consent in the TripLog application, jump to the Import/Add Users section, and the consent should process at that time.
Import Users from ADP
Bringing in your Users From ADP will create TripLog accounts and send the created user a Welcome email with instructions on how to download and log in to the app.
In the TripLog Dashboard
Manage > Users
Add User Options
Import Users: This will initiate a Load of the ADP Workers Screen and attempt to link existing users. (This may take longer depending on how many users in your organization in ADP)
Update ADP Users: This will initiate the user link process without opening the table. This is a good step to use if you already have non-linked users added in TripLog but have updated them in ADP. (This may take longer depending on how many users in your organization are in ADP)
Add Non-ADP User: This option will allow you to create a new user in TripLog without an existing user account in ADP. This can later be linked using the other processes. This is a good option to get a user up and running in TripLog prior to information updating in ADP. Unlinked users will not be available to upload to ADP.
Import ADP Users
This will initiate a connection to the ADP User Menu. If this is the first time, you will be presented with another Consent screen. Please click “ALLOW“. Then continue to the Import Workers Screen.
Link Existing TripLog Users / Identifying Linked Users
When loading this screen, the process will attempt to match existing users in TripLog by their email to the ADP users list matching the Work Email Address. The example in Blue is an already linked user.
Add New Users
Users that have complete profiles, do not currently have a TripLog account and can be imported will have a checkbox as indicated in green in the image above. This version has an Associate OID, Company Code, and File Number. Check the Box and click Import Workers to process the selected users. This will create a new TripLog user and send the user a Welcome email.
Correct Missing Data
If there is missing data represented on this screen that could be due to the user being added recently or their profile is incomplete in ADP. The refresh occurs roughly every 4 hours so check back if there is missing info and you validate the corrections on the ADP side.
You can click Done to exit this menu with no additional changes.
Set up ADP Payroll Settings
As an ADP practitioner, only you can upload mileage and expense data to ADP payroll. But first, you need to set up TripLog to match the ADP codes. On the top menu bar, select ADP from the Integrations Menu. Then click “ADP Settings“.
You need to choose:
What kind of expense code you would like to use for reimbursement items? Choose the “Earnings” option, The mileage and expense reimbursement amount will be uploaded as positive numbers, and that’s the amount employees will “earn” during the pay cycle. Choose “Deduction” option, the amount will be uploaded as negative numbers, and the employees will be deducted a negative amount, which in fact is equivalent to earnings. The ADP Expense Codes selection will also change corresponding to the “earning” or “deduction” selection.
Match TripLog Expense Categories with ADP Expense Codes. Only match the ones you need, mainly “Mileage”, and possibly “Toll”, “Parking”, and other expense categories. The unmatched expenses won’t be able to upload.
Upload Mileage and Expenses to ADP
Once your employees have collected some mileage or expenses data using TripLog mobile app, and you are ready to upload those to ADP, you can go to the TripLog ADP page.
There are a few prerequisites:
A payroll cycle in ‘Entering Payroll Information’ or ‘Correcting Input’ status.
Mileage and other expense types are mapped with ADP Expense Codes.
Select the correct dates, trip activities, and/or expense categories.
Review the reimbursement items and amount, one employee per row.
Click “Upload to ADP“. You will also need to enter the Pay Number each time you upload. The default number is 1.
For RUN Powered by ADP®, it’s at top menu Home > Time Sheet Import. You would need to select the pay cycle and find the uploaded mileage amount.
Manage ADP billing and subscription
Once you have set up the ADP connection, if you need to modify the number of users in your subscription, you can modify your TripLog licenses at ADP Marketplace > Your name > My Apps > find the TripLog app > Manage App.
When adding users (additional licenses), you will want to select the total number of users.
Example: Increasing the number of licenses from 30 to 40. To complete this, enter 40 as the total users. (ADP will process any difference by returning the unused portion and charging the difference.)
Once the correct number is selected, follow the screens to complete your purchase.
Troubleshooting and Corrections:
Upload Errors:
User Shows Missing OID / Company Code / File number: Update the user and validate the link in Manage Users > Add User > Update ADP Users
Item Shows Missing ADP Code, the expense item in TripLog is not matched to a valid code in ADP. This may need to be a category that is changed or hidden in TripLog to no longer use, or it needs to be correctly linked with the ADP Settings Menu
If you need to process these items without uploading to ADP, you can use the Mark as Uploaded to tag them as paid in ADP without sending them over. An example is that you manually paid the user for the reimbursement, but they were not fully set up in ADP, so you mark the items so they are not eligible to be uploaded/paid again.
Updating the User OID
You can clear the OID, then go to Add User > Update Users to relink the email to the corrected ID,
Click the Clear Link next to the ADP OID, then Save
Go to Add Users > Update
Manually updating the Company Code or File Number
Select Override, and you can manually enter the Company Code AND File Number
If there are two Company Code / File Number combinations, there will be a drop-down to select the correct combination.
Save when finished.
Known Issues:
ADP Overall
If there is a limit on your subscribers, you will need to correct the available seats in ADP to be able to add users with both the Full and Connector integration
If you transfer an employee with in Company Codes, you may need to navigate to Import workers to update that connection. You can also update the user profile in the Manage users to use the correct Company Code/File ID
Cancellations are also handled through ADP. If you need to remove the connection to ADP, please contact TripLog support once you have cancelled the subscription in ADP.
























